LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (61 - Convertible Top, Hardtop -- (981) BOXSTER) >> WM 614519 Removing And Installing Rubber Seal With Rail (Lower Lateral) (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER SPYDER) >> Installing Rubber Seal With Rail (Lower Lateral)

Installing Rubber Seal With Rail (Lower Lateral)

WARNING: This page is about a different car, the 2016 Porsche Boxster, 2015 Porsche Boxster, 2014 Porsche Boxster, and 2013 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pre-fit rubber seal at the retaining strip.
  2. Fit fastening screws.
  3. Press retaining strip back completely. -arrows A- 
  4. Tighten fastening screws to the specified tightening torque.
    Fig 1: Pressing Retaining Strip Back
    G10024462Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Hook in seal at the top.
    1. 5.1. Pull seal -1-  up and off. -arrow A- 
    2. 5.2. Hook in seal -1-  at the clip -2-  .
      3. Fig 2: Removing Seal
      G10024463Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Engage seal completely in the retaining strip. -arrows B and C- 
    Fig 3: Engaging Seal
    G10024464Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals