Removing Seal For Roof Assembly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Roof Assembly Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

CAUTION: Pointed or sharp objects

Risk of cracks, pricks or cuts

→ Wear personal protective gear.

Cover accessories adjacent to the repair area on the vehicle.
Cut original seal -1- using a Stanley knife.

Fig 2: Cutting Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 2.1. Remove adhesive residue if necessary.
Cut off plastic clamp -1- on the seal using a suitable tool.

Fig 3: Cutting Plastic Clamp
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 3.1. Remove plastic component you have just cut off.