Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gap Between Front Roof Pillar And Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Front Roof Pillar With Respect To Roof | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap Between Front Cover And Side Panel |
|||||
| Gap Between Rear Roof Pillar And Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Rear Roof Pillar With Respect To Roof | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap Between Rear Cover And Side Panel |
|||||
| Fastening Nuts For Roof Assembly | Tightening Torque | 10 Nm (7.5 ft. lbs.) | |||
|
Fastening Nuts On Roof Assembly |
|||||
| Windshield To Roof, Front, Outer | D | Length | 40 mm | ||
| Front Roof Cover, Centre Axis/Right | B | Length | 300 mm | ||
| Front Roof Cover, Centre Axis/Left | C | Length | 100 mm | ||
| Windshield To Roof | A (Full Roof) | Length | 120 mm | ||
| Roof Pillar To Rear Roof | A | Length | 45 mm | ||
| Rear Window To Rear | B | Length | 30 mm | ||