Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic Value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front Cover To Side Panel/Windshield | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Front Cover With Respect To Side Panel/Windshield | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap From Front Cover To Side Panel |
|||||
| Front Cover To Side Panel/Sliding Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Front Cover With Respect To Side Panel/Sliding Roof | Only Install Lowered (B) | Gap Dimension | -1 mm | -1 mm | |
|
Gap From Front Cover To Side Panel |
|||||
| Rear Cover To Side Panel/Sliding Roof | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Rear Cover With Respect To Side Panel/Sliding Roof | Only Install Lowered (B) | Gap Dimension | -0, 6 mm | -1 mm | |
|
Gap From Rear Cover To Side Panel |
|||||
| Rear Cover To Side Panel/Rear Window | A | Gap Dimension | 5.5 mm | -1 mm | |
| Offset Of Rear Cover With Respect To Side Panel/Rear Window | Only Install Lowered (B) | Gap Dimension | 0 mm | -1 mm | |
|
Gap From Rear Cover To Side Panel |
|||||
| Fastening Nut For Roof Assembly | Tightening Torque | 10 Nm (7.5 ft. lbs.) | |||
|
Fastening Nuts For Roof Assembly |
|||||
| Windshield To Front Roof Cover | D | Length | 40 mm | ||
| Roof Pillar To Front Roof Cover | E | Length | 45 mm | ||
| Sliding Roof Opening In Front Roof Cover | A | Length | 40 mm | ||
| Front Roof Cover, Centre Axis/Right | B | Length | 300 mm | ||
| Front Roof Cover, Centre Axis/Left | C | Length | 100 mm | ||
| Roof Pillar To Rear Roof Cover | B | Length | 45 mm | ||
| Rear Window To Rear Roof Cover | A | Length | 30 mm | ||