Rear Seat Belt
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw for deflector on C-pillar | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Removing rear three-point belt |
|||||
| Belt retractor on C-pillar | Item 3 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Removing rear three-point belt |
|||||
| Fastening screw for belt retractor on roll-over bar | Tightening torque | 50 Nm (37 ftlb.) | |||
|
Removing seat-belt pretensioner |
|||||
| Fastening screw for seat-belt mount in rear wheel housing | Tightening torque | 50 Nm (37 ftlb.) | |||
|
Removing seat belt with seat-belt mount |
|||||
| Fastening nut for rear belt lock | Item 1 | Tightening torque | 50 Nm (37 ftlb.) | ||
|
Removing rear belt lock |
|||||