Removing Rear Wheel Cover

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove wheel covers at the wing and rear apron.

Fig 1: Removing Rear Wheel Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 1.1. Heat up wheel covers using the hot-air blower.
2. 1.2. Pry wheel covers -1, 2- off evenly all the way around using an assembly wedge -arrows- .
Remove adhesive residue.
1. 2.1. Remove adhesive residue in the installation area using an erasing disc.
  
  Fig 2: Removing Adhesive Residue
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  Fig 3: Identifying Erasing Disc
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.