Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Targa bar to glass dome (G1) | Gap dimension | 6.3 mm | +/-0.5 mm | ||
|
Gap dimension: Targa bar to glass dome |
|||||
| Targa bar to glass dome (G2) | Gap dimension | 6.3 mm | +/-0.5 mm | ||
|
Gap dimension: Targa bar to glass dome |
|||||
| Trim panel on sides of Targa bar to trim panel flap (B1) | Gap dimension | 2 mm | +/-0.8 mm | ||
|
Gap dimension: Trim panels on Targa bar |
|||||
| Trim panel flap to center trim panel on Targa bar (B2) | Gap dimension | 3 mm | +/-0.8 mm | ||
|
Gap dimension: Trim panels on Targa bar |
|||||