LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 293 (66 - Exterior Equipment -- 911 CARRERA (991)) >> WM 660319 Removing And Installing Front Spoiler (Pneumatics) (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO) >> Installing Front Spoiler (Pneumatics)

Installing Front Spoiler (Pneumatics)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Air hoses are color-coded and must not be interchanged.

Observe marking for insertion depth of hose connection.

Hoses must not be kinked.

Information 

Check that none of the fastening clips are deformed or broken.

Replace missing or damaged clips with new clips.

Make sure that all fastening clips are engaged securely.

Make sure that all cables and hoses are engaged securely in the brackets.

  1. Installation is performed in reverse order to removal.
  2. Tighten fastening screws to the specified tightening torque Tightening torque 2.5 Nm (2 ftlb.)  until secure.
  3. Install front apron. → Installing Front Apron
scientia non olet · About LEMON Manuals