Tightening Torques For Cross Member/Side Member (One Component)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Threaded connection, cross member to body (front) M12 x 1.5 | Please note: Do not grease threaded connection in Dacromet finish - aluminum color. | Tightening torque | 100 Nm (74 ftlb.) | ||
| Threaded connection, cross member with diagonal arm to body (front) M 14 x 1.5 | Please note: Do not grease threaded connection in Dacromet finish - aluminum color. | Tightening torque | 160 Nm (118 ftlb.) | ||
| Threaded connection, cross member to body rear (two screws each side) M 14 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum color. | Tightening torque | 160 Nm (118 ftlb.) |