Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Fill the steering hydraulic system with Pentosin and top up the fluid level in the cooling system.
Then bleed the steering and cooling system.
→ 480201 CHECKING THE FLUID LEVEL FOR POWER STEERING
→ 193817 DRAINING AND FILLING IN COOLANT (INCLUDES BLEEDING THE SYSTEM)
Information
When topping up or filling in Pentosin, make sure that it does not come into contact with the coolant hoses. Observe the specifications in order to avoid overfilling, and thus overflowing.
- If coolant hoses come into contact with Pentosin, clean them thoroughly with water IMMEDIATELY.
- Replace visibly swollen coolant hoses.
- Tighten all threaded connections to the specified tightening torque.
- Install front wheels.
- Install front underbody panels.
- Perform suspension alignment.