LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (35 - Mechanical Gear-Shift System - Gears & Shafts -- 987-BOXSTER-CAYMAN) >> WM 354037 Disassembling And Assembling The Drive Shaft (CAYMAN, BOXSTER, BOXSTER LIM. Ed. "Orange", BOXSTER "Sport Edition") >> Disassembling The Drive Shaft >> Removal Instructions For Drive Shaft

Removal Instructions For Drive Shaft

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Circlips of different sizes and thicknesses are used. For this reason, the individual circlips must be marked (e.g. with numbers). The thickness of the circlip must be determined again if a directly affected component is replaced.

  1. Press off fixed gear wheel for 5th gear -as shown in illustration-  .
    Fig 1: Pressing Off Gear Wheel For 5th Gear
    G09586771Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press synchronizer ring for 3rd gear -Arrow-  to the loose gear wheel for 3rd gear.
  3. Press off synchronizing hub for 3rd and 4th gear -as shown in illustration-  .
    4. Fig 2: Pressing Synchronizer Ring For 3rd Gear
    G09586772Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals