LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (48 - Steering -- 987-BOXSTER-CAYMAN) >> WM 481319 Removing And Installing Trim Panel On Steering Column Switch (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER S Black Edition, CAYMAN R) >> Removing Trim Panel On Steering Column Switch

Removing Trim Panel On Steering Column Switch

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. To remove the trim panel on the steering column switch, move the steering wheel to a suitable position.
  2. Remove trim panel on steering column switch.
    1. 2.1. Remove lower trim panel on the steering column switch.
      Fig 1: Locating Lower Trim Panel On Steering Column Switch
      G09587975Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      1. 2.1.1. Remove screws -1-  .
      2. 2.1.2. Press off retaining clip -3-  on lower trim panel -2-  .
      3. 2.1.3. Lift lower trim panel -2-  slightly and disengage it from the upper trim panel.
    2. 2.2. Remove upper trim panel on steering column switch.
      Fig 2: Locating Upper Trim Panel On Steering Column Switch
      G09587976Courtesy of PORSCHE CARS NORTH AMERICA, INC.
      1. 2.2.1. Press upper trim panel -4-  off using an assembly wedge -arrows-  .
      2. 2.2.2. Disconnect electric plug connections -5-  and remove upper trim panel -4-  .
scientia non olet · About LEMON Manuals