LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (55 - Lids, Flaps -- 987-BOXSTER-CAYMAN) >> WM 555919 Removing And Installing Rear Wall Cover (BOXSTER, BOXSTER S, BOXSTER LIM. Ed. "Orange", BOXSTER S LIM. Ed. "Orange", BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Installing Rear Wall Cover

Installing Rear Wall Cover

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2012 Porsche Cayman, 2012 Porsche Boxster, 2011 Porsche Cayman, 2011 Porsche Boxster, and 2010 Porsche Cayman. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position rear wall cover -3-  on the rear wall.
  2. Tighten fastening nuts -2-  and fastening screws -1-  . Tightening torque → Tightening torque: 7.0 ftlb. 
    3. Fig 1: Installing Rear Wall Cover
    G09589734Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals