LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayman Base, Automatic DCT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- (981) BOXSTER/CAYMAN >> WM 635719 Removing And Installing Rear Retaining Strip (All Models) >> Installing Rear Retaining Strip

Installing Rear Retaining Strip

  1. Fit rear retaining strip -2-  and slide it up -A-  until the retaining strip is touching the side panel.
    1. Fastening nuts
    2. Rear retaining strip
  2. Screw on fastening nuts -1-  and tighten to Tightening Torque 7 Nm (5 ft. lbs.) +0.7 Nm (+0.4 ft. lbs.) -1 Nm (-0.5 ft. lbs.)  until secure.
Fig 1: Installing Rear Retaining Strip
G10027019Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals