| No. 1: Threaded connection securing speed sensor to wheel carrier |
M6 x 16 thread |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| No. 2: Threaded connection securing brake cover plate to wheel carrier |
M6 x 12 thread |
Tightening torque |
8 Nm (6 ftlb.) |
|
|
| No. 3: Threaded connection securing brake calliper to wheel carrier |
M14 x 1.5 x 115 thread (always replace screws and lock nuts after removal) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| No. 3: Threaded connection securing brake calliper to wheel carrier 19" and PCCB |
M14 x 1.5 x 135 thread (always replace screws and lock nuts after removal) |
Tightening torque |
140 Nm (104 ftlb.) |
|
|
| No. 4: Threaded connection securing brake hose bracket to wheel carrier |
M6 x 12 thread |
Tightening torque |
9 Nm (6.5 ftlb.) |
|
|
| No. 5: Threaded connection securing cable holder to wheel carrier |
M8 x 14 thread |
Tightening torque |
20 Nm (15 ftlb.) |
|
|
| No. 6: Threaded connection securing brake disc to wheel hub |
M12 x 1.5 thread |
Tightening torque |
15 Nm (11 ftlb.) |
|
|
| Wheel bearing to wheel carrier |
M12 x 1.25 thread (always replace screws and lock nuts after removal) |
Tightening torque |
80 Nm (59 ftlb.) |
+120° |
|