Boost Pressure And Wastegate 2
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| 1 |
Pressure line |
| 2 |
Vacuum line |
| 3 |
Hose clamp |
| 4 |
Screw. M6 x 12 > Tightening torque 10 (7.5 ftlb.) Nm
-- dang -- |
| 5 |
Holder |
| 6 |
Rubber element |
| 7 |
Electric change-over valve |
| 8 |
Control line |
| A |
View A; pressure line connection on intake-air distributor |