Installing Carbon Canister - Usa

WARNING: This page is about a different variant/trim than selected.

Fig 1: Carbon Canister With Leakage Diagnosis Pump Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Component overview of carbon canister with leakage diagnosis pump

1	Carbon canister
2	Fastening screws
3	Thick blue hose
4	Thin black hose
5	Electric line
6	Leakage diagnosis pump
7	Vacuum line for leakage diagnosis pump

Clip electric line -5- at the back of the carbon canister into the brackets.
Connect vacuum line -7- for the leakage diagnosis pump -6- .
Plug in electric plug connection on leakage diagnosis pump -6- until the connector engages securely.
Attach hose connections -3 and 4- to the carbon canister -1- .
Tighten three fastening screws -2- on the carbon canister -1- .
> Tightening torque 9 (6.5 ftlb.) Nm