Tightening torques for heater
WARNING: This page is about a different car, the 2018 Porsche Macan and 2017 Porsche Macan. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Heater holder to body | M6 x 30 thread | Tightening torque | 20 Nm (15 ftlb.) | ||
| Exhaust silencer pipe to underbody | Nut, M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Exhaust silencer holder to underbody | Nut, M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Solenoid valve holder to body | Nut, M6 | Tightening torque | 9 Nm (6.5 ftlb.) | ||
| Auxiliary heater hose in wheel arch to body | Nut, M6 | Tightening torque | 9 Nm (6.5 ftlb.) |