Removing Motor For Sun Blind

→ Remove the ignition key and switch off load before disconnecting or removing load.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 
  Fig 1: Identifying Motor For Sun Blind Installation Position

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Pull lock for electric plug connection -2-  off the sunroof motor -A-  .
2. Release electric plug connection -2-  for sunroof motor -a-  and disconnect it -B-  .
3. Unscrew fastening screws -3-  on motor for sun blind -1-  .
   Fig 2: Pulling Lock For Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Remove the motor.
   Fig 3: Removing Motor

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.