LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayenne Turbo >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 92A Cayenne >> WM 635719 Removing And Installing Rear Retaining Strip (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Rear Retaining Strip >> Installing Upper Retaining Strip

Installing Upper Retaining Strip

  1. Fit upper retaining strip.
  2. Screw in fastening nuts -2-  and tighten to Tightening torque 3 Nm (2 ftlb.)  .
    Fig 1: Identifying Upper Retaining Strip
    G09940000Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Secure wire harness at the retaining strip.
scientia non olet · About LEMON Manuals