Secondary-Air Pump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - SECONDARY-AIR PUMP
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Secondary-air pump bracket on valve cover | Aluminium screw, M6 | Initial tightening | 4 (3 ftlb.) Nm | |
| Secondary-air pump bracket on valve cover | Aluminium screw, M6 | Torque angle | 90° |
Screw plug on secondary-air duct
| 1 | > Tightening torque 10 (7.5 ftlb.) Nm |
TIGHTENING TORQUE SPECIFICATIONS
| Location | Description | Type | Basic value | Tolerance |
|---|---|---|---|---|
| Secondary-air valve on cylinder head | M6 | Tightening torque | 10 (7.5 ftlb.) Nm |