Subsequent Work

Information 

The tightening specifications for the basic engine are stored centrally.

> 1X00IN TECHNICAL VALUES

/

> 2X00IN TECHNICAL VALUES

or

> 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES AND ASSEMBLY OVERVIEWS .

Tightening torques and assembly instructions for other assemblies (e.g. chassis, electrics, transmission or body) or for peripheral engine equipment can be found in the corresponding documents.

1. Fit oil guide/oil plate.
   Fig 1: Oil Guide Components Location (Oil Plate)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Oil guide (oil plate)

   1	Oil guide (oil plate)
   2	Oil return seal
   3	Screw, M6 x 20
   4	Bulkhead seal
   5	Joining socket
   6	O-ring
   7	Assembly depth until locking lug engages
   A	Direction of travel

2. Install the oil pump.

   > 172019 REMOVING AND INSTALLING OIL PUMP

3. Install cylinder heads.

   > 157019 REMOVING AND INSTALLING CYLINDER HEAD

4. Fit timing chain.

   > 153519 REMOVING AND INSTALLING TIMING CHAINS

5. Fit timing-case cover.

   > WM, 153319 REMOVING AND INSTALLING UPPER CHAIN HOUSING COVER

6. Fit oil pan and oil guide housing.

   > WM, 175019 REMOVING AND INSTALLING OIL PAN

7. Fill in engine oil. For details, see > 170117 DRAINING AND FILLING ENGINE OIL (CHANGING ENGINE OIL)
8. Remove engine from the assembly support.
9. Refit transmission.
10. Install the engine.

    > 100119 REMOVING AND INSTALLING ENGINE