Subsequent Work

Information 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Dimension -X-  : lower edge of wing to centre of axle (shown as an example)

• All screws and bolts on the axle must be tightened in vehicle position. Vehicle position means: vehicle resting on its wheels, or the wheel suspension is lifted with a universal jack. -Dimension X- from lower edge of wing to centre of axle corresponds to vehicle position. For the current height values, please refer to the adjustment values for suspension alignment 

  > 4495TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT .

• Visually inspect all parts. 
• Replace self-locking nuts. 
• Replace all expansion screws (screws fitted using torque angle tightening procedure). 
• Use correct tightening torques and torque angle. 

  > Refer to the appropriate Tightening Torques For Front Axle service information

1. Install lower trailing arm.

   > 401719 Removing and installing lower trailing arm - section on "INSTALLING "