Suspension Subframe
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing suspension subframe to body (front) | M14 x 1.5 x 150 thread (always replace screws and lock nuts after removal) | Tightening torque | 120 Nm (89 ftlb.) | +180° | |
| No. 2: Threaded connection securing suspension subframe to body (rear) | M14 x 1.5 x 120 thread (always replace screws and lock nuts after removal) | Tightening torque | 120 Nm (89 ftlb.) | +180° |