Removing Switch For Height And Fore-And-Aft Adjustment

Information 

The switch for height and fore-and-aft adjustment is located on the bottom of the steering column casing.

1. Insert a suitable flat screwdriver into the slit -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Inserting screwdriver

2. Press the clip back using the flat screwdriver.
3. Pull the switch -2-  down out of the way.
4. Unplug electric plug connection -1-  .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Pulling off connector