Installing Crankshaft-Flywheel Sealing Ring

Information 

Sealing rings become damaged as a result of improper fitting. Do not oil sealing rings on the running surface and do not pull sealing rings off the plastic sleeve.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Insertion tool 9837

1. Place sealing ring -2-  on the centring device -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Placing sealing ring on centring device

2. Secure centring device -1-  on the crankshaft.
   1. 2.1 Position centring device -1-  on the crankshaft flange.
   2. 2.2 Position centring device -1-  using the crankshaft centring pin -2-  .
   3. 2.3 Tighten screws -3-  to > Tightening torque 23 Nm  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Securing centring device to the crankshaft

3. Install crankshaft-flywheel sealing ring.
   1. 3.1 Fit insertion tool for crankshaft-flywheel sealing ring -1-  on the centring device.
   2. 3.2 Guide centring pin -3-  on the centring device through the bore in the insertion tool for the crankshaft-flywheel sealing ring -1-  .
   3. 3.3 Tighten screw -2-  to > Tightening torque 25 Nm  .
   4. 3.4 Remove insertion tool completely and check press-in depth.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Insertion tool for crankshaft-flywheel sealing ring