LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayenne GTS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - Crank Drive, Pistons (4.8L Non Turbo) -- 92A - Cayenne (92A) >> WM, 137419 Removing And Installing Sealing Ring For Crankshaft Pulley >> Removing Sealing Ring For Crankshaft Pulley

Removing Sealing Ring For Crankshaft Pulley

  1. Loosen the four fastening screws and remove the sealing flange with sealing ring.
    1. 1.1 Replace joint flange.
    G16308380Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing cover with sealing ring

  2. Clean the sealing surface of the sheetmetal cover.
scientia non olet · About LEMON Manuals