Technical Values
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| X = distance from upper part of rear apron | V8 Turbo | Gap dimension X | 18 mm | ||
| Y = work out distance at sides to the left and right uniformly | V8 Turbo | Gap dimension Y | 18 mm | ||
| Gap Detween tailpipes | V8 Turbo | Gap dimension Z | 5 mm | ||
| X = distance from upper part of rear apron | V8 naturally aspirated engine | Gap dimension X | 20 mm | ||
| Y = work out distance at sides to the left and right uniformly | V8 naturally aspirated engine | Gap dimension Y | 20 mm |