LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Cayenne Diesel >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 408519 Removing And Installing Front Spring Strut (Steel Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Front Spring Strut (Steel Springs)

Removing Front Spring Strut (Steel Springs)

WARNING: Wheel bearing housing raised incorrectly
  • Risk of squashing
  • Risk of damage to components

→ Wear personal protective gear.

→ Do not raise the wheel suspension higher than the normal vehicle position (vehicle resting on wheels).

Information 

For vehicles with PDCC, raise the wheel suspension slightly using a transmission jack (do not raise wheel suspension higher than normal vehicle position (vehicle resting on wheels). This changes the angular position of the control arm and the spring strut can be removed by turning carefully.

Information 

  1. Screw fastening nuts -1-  off the upper spring strut.
    Fig 2: Identifying Upper Spring Strut (Steel Spring)
    G09935253Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Carefully pull the spring strut -1-  down -A-  and then remove it in an upward direction -B-  .
    Fig 3: Removing Spring Strut (Steel Spring)
    G09935254Courtesy of PORSCHE CARS NORTH AMERICA, INC.