Replacing Charge Air Cooler
- Remove accessories.
- Unscrew fastening screws -1-
for the charge air line -2-
at the charge air cooler -3-
.
- At the rear air guide -1-
, unclip the side locking mechanisms -2-
and pull out the air guide.
- At the front air guide -2- , unclip the side locking mechanisms -1- and pull out the air guide.
- Unscrew fastening screws -1-
for the charge air line -2-
at the charge air cooler -3-
.
- The accessories are installed in reverse order to removal.
- Tighten fastening screws for the intake pipe to > Tightening torque 5.5 Nm .