Component Overview

The steel springs are not applicable for the Cayenne Turbo.

Standard Cayenne Turbo equipment: Air springs with levelling system and height adjustment.

Fig 1: Identifying Steel Spring Strut - Complete (With PASM)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Exploded View Of Steel Spring Strut (With PASM)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

No.	Designation	Note
-1-	Connector housing	Only for PASM (Porsche Active Suspension Management)
-2-	Grommet (connector)	Only for PASM
-3-	Grommet (cable)	Only for PASM
-4-	Cable guide	Only for PASM
-5-	Hexagon nut (4x)	Use new hexagon nuts.
-6-	Cable holder (rubber)	Only for PASM
-7-	Cover
-8-	Lock nut	Use a new lock nut.
-9-	Supporting mount
-10-	Concave support
-11-	Upper support	Fit together at the correct position with upper base. (Align triangular markings all around).
-12-	Upper base	Fit together at the correct position with upper support. (Align triangular markings all around).
-13-	Boot
-14-	Rubber stop
-15-	Washer	No longer used from model year B onwards.
-16-	Cap
-17-	Coil spring
-18-	Lower base	Fit together at the correct position with lower support. (Align triangular markings all around).
-19-	Lower support	Fit together at the correct position with lower base. (Align triangular markings all around).
-20-	Spacer	Number of spacers depends on the tolerance class (0 spacers, 1 spacer or 2 spacers). The number depends on the number of violet dots on the coil spring.
→ see Fig 2-21-	Concave washer	.
→ see Fig 2-22-	Shock absorber