Installing Brake Master Cylinder
- Carefully insert the brake master cylinder -1-
together with the brake fluid reservoir -2-
into the brake booster -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit fastening nuts -1-
for the brake master cylinder -2-
at the brake booster -3-
. Tightening torque 23 Nm (17 ftlb.) +/-2 Nm (+/-1.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- If the brake master cylinder was replaced, press the brake fluid reservoir -2-
into the brake master cylinder -2-
(-arrow-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- 3.1. Fit fastening screw -1-
for the brake fluid reservoir -2-
on the brake master cylinder -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Fit brake lines -2-
on the brake master cylinder -3-
. Tightening torque 18 Nm (13 ftlb.) +/-2 Nm (+/-1.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Connect electric plug connection -1-
for the brake fluid level indicator -arrow A-
and lock it.
- Fit the brake light switch if necessary. → Installing Brake Light Switch
- Insert sieve filter -1-
into the brake fluid reservoir -3-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.