Removing Control Unit For Steering Wheel Electronics

→ When removing and installing the steering column switch, turn the steering wheel so that the wheels are in straight-ahead position. This ensures that the airbag contact unit is locked in the central position.

→ Do not trap the cable of the airbag contact unit.

→ Check that the cable is routed correctly.

1. Release electric plug connections -1-  and disconnect them from the steering wheel electronics control unit -2-  .
2. Unscrew fastening screw -3-  .
   Fig 1: Identifying Steering Wheel Electronics Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Carefully disengage locking mechanisms -1-  on the steering wheel electronics control unit -2-  and remove steering wheel electronics control unit from the steering-column switch -3-  .
   Fig 2: Identifying Steering Wheel Electronics Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.