Removing Bulb For Reading Light

→ Switch off ignition and remove ignition key.

→ Switch off the relevant loads when changing bulbs.

→ Only use bulbs listed in the bulb table.

→ Only install clean bulbs that are free of grease.

→ Always use a cloth or soft paper when working with bulbs.

→ Observe the safety instructions when changing a bulb in a Bi-Xenon headlight.

→ In certain states, it is compulsory to carry spare light bulbs.

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .

1. Turn socket -1-  90° in direction of arrow and pull it out of the reading light -2-  .
2. Remove bulb -3-  from its socket.
   Fig 1: Identifying Bulb On Socket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.