| Brake hose bracket to wheel carrier |
M6 screw |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Wheel hub to wheel carrier (tension bolt) |
Lock nut, M22 x 1.5/always use new lock nuts following removal |
Tightening torque |
460 Nm (340 ftlb.) |
|
|
| Wheel bearing assembly with housing to wheel carrier (GT4 only): Step 1 |
Fit cheese head bolts (M12 x 1.25 x 45/use new bolts if re-tightened |
Tightening torque |
80 Nm (59 ftlb.) |
|
|
| Wheel bearing assembly with housing to wheel carrier (GT4 only): Step 2 |
Cheese head bolts, M12 x 1.25 x 45/use new bolts if re-tightened |
Torque angle |
120 Grad |
|
|