LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 946419 Removing And Installing Fog Lights (911 Turbo Coupe, 911 Turbo S Coupe, 911 Turbo CABRIO, 911 Turbo S CABRIO, 911 Gt3, 911 Gt2, 911 Gt2 RS) >> Installing Fog Lights

Installing Fog Lights

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the fog light on the front apron and secure in place with the two fastening screws -1-.
    Fig 1: Securing Fog Light And Connecting Electric Plug Connection
    G09830900Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    Check the breather hose -1-  for signs of damage and check that it is seated securely.

    Fig 2: Identifying Breather Hose
    G09830901Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    If in doubt, replace the breather hose.

  2. Connect the electric connector to the fog light until the connector engages securely.
  3. Plug the electric connector for the direction indicator light into the fog light.
scientia non olet · About LEMON Manuals