Removing Bulb For Parking Light

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Parking Light

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

The direction indicator light can only be completely removed when the front apron is removed.

When removing the direction indicator light in order to access the parking light bulb, the direction indicator light is removed from the front apron mounting and remains connected to the wire harness on the front apron.

Unscrew the fastening screw for the front direction indicator light.

Fig 2: Removing Fastening Screw For Direction Indicator Light
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull the outside of the direction indicator light forward and then towards the outside of the front apron.

Fig 3: Removing Direction Indicator Light
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Open the bulb holder for the parking light bulb (bayonet lock) by turning it anti-clockwise and pull it out of the direction indicator light.

Fig 4: Removing Bulb
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove bulb from the holder.