LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (94 - Lights, Lamps, Switches, Exterior -- CARRERA (997)) >> WM 941537 Disassembling And Assembling Bi-Xenon Headlights (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Disassembling Bi-Xenon Headlights >> Removing Gas-Discharge Headlight

Removing Gas-Discharge Headlight

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn connector to the left (bayonet lock) and pull it off.
    Fig 1: Releasing Connector
    G09830698Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -4-  for the sheetmetal cover and remove the two sheetmetal parts -5- -6-  .
    Fig 2: Removing Fastening Screw On Sheetmetal Cover
    G09830699Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Disengage both retaining bows and pull out lamp.
    Fig 3: Disengaging Retaining Bows
    G09830700Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals