Installing Headlight Mount

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

The main headlights are fitted into the body at the factory.

A new adjustment may only be made in the case of accident repairs or replacement of the main headlights.

The headlight mount is secured to the body by 3 knurled nuts.

Push the mount into the body and screw down with three knurled nuts. → Tightening torque: 6 ftlb.+/-1.5 ftlb.

Fig 1: Adjusting Element
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check that the gaps match the specified gap dimensions → DIAGRAM - BODY FRONT GAP DIMENSIONS . Adjust the headlight mount if necessary. → Installing Headlight Mount