LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- (981) BOXSTER/CAYMAN >> WM 422119 Removing And Installing Drive Shaft (All Models) >> Subsequent Work

Subsequent Work

  1. Fit rear wheel. → INSTALLING WHEEL .
  2. Screw on axle nut (securing drive shaft to wheel bearing housing) and tighten to Tightening torque 460 Nm  until secure. Also press the brake (second mechanic required) while the vehicle is stationary on the ground.
scientia non olet · About LEMON Manuals