Removing Roof Molding
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull rubber door seal -1-
out of the body close to the roof molding -arrows-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Turn the fixing clip -1-
along the roof molding -2-
by 90° using a Torx wrench -arrow-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Remove roof molding.
- 3.1. Starting at the front, pull the roof molding -1-
down as far as the B-pillar -arrows-
. Insert a plastic wedge between the roof molding and body if necessary.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Pull the roof molding forward out of the guide for the side window.