LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 53 - Body Rear - BOXSTER & CAYMAN (981) >> WM 536155 Replacing Inner Side Section (Except CAYMAN, CAYMAN S, CAYMAN GTS, BOXSTER GTS) >> Preparing Inner Side Section For Installation

Preparing Inner Side Section For Installation

  1. Fit in inner side section and secure it to the body. Check gap dimensions. → 5X00IN41 GAP DIMENSIONS .
  2. Prepare the marked connection areas for bonding and welding.
    G10023467Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    Red Plug-welding/apply a full weld using inert gas without bonding
    Yellow Bonding + riveting
    8
    Blue    		 Bonding
    Magenta Bonding + resistance spot-welding
    Green Resistance spot-welding
scientia non olet · About LEMON Manuals