LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (10 - Engine - Crankcase, Suspension -- 911 CARRERA (991)) >> WM 108019 Removing And Installing Engine Guard (Gt3, Gt3 RS) >> Installing Engine Guard

Installing Engine Guard

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit engine guard and tighten fastening screws.

    → Tightening torque: 10 Nm (7.5 ftlb.) 

  2. Lower the vehicle.
scientia non olet · About LEMON Manuals