LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 289 (10 - Engine - Crankcase, Suspension -- 911 CARRERA (991)) >> WM 105519 Removing And Installing Oil Separator (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. On Cabriolet vehicles: Open convertible-top compartment lid. 
  2. Remove air cleaner housing.

    → 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING .

    WARNING: Danger of objects or loads falling down
    • Risk of squashing or crushing

    → Secure components to prevent them from falling down.

    Information 

    • When lowering, the engine must not rest on the rear axle cross member. 

    Information 

    • It may only be supported over a large area at the oil pan. 
    • Localized loading is not permitted. 
  3. Remove intake-air distributor, side 4-6.

    → 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR .