Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Shift cover to transmission |
Aluminum screw, M8 x 22 - always replace screws - medium setting |
Initial tightening |
6 Nm (4.5 ftlb.) |
|
|
| Neutral gear sensor to shift cover |
Torx screw, M5 x 12, replace screws |
Tightening torque |
5.5 Nm (4 ftlb.) |
|
|