LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (34 Mechanical Transmission Actuator Housing -- 911 CARRERA (991)) >> WM 340819 Removing And Installing Gearshift Bracket (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Installation >> Installing Gearshift Bracket

Installing Gearshift Bracket

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position gearshift bracket -2-  and screw in and tighten fastening screws -1-  .

    Tightening torque 8 Nm (6 ftlb.) 

    Fig 1: Identifying Gearshift Bracket
    G09992271Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals