LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 287 (34 Mechanical Transmission Actuator Housing -- 911 CARRERA (991)) >> WM 340819 Removing And Installing Gearshift Bracket (Except CARRERA "Edition", CARRERA Cabriolet "Edition", Turbo, Turbo S, CARRERA 4 "Edition", Turbo CABRIO, Turbo S CABRIO, CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Adjusting Shift And Selector Cables

Adjusting Shift And Selector Cables

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Make sure that the transmission is in neutral.
  2. Locking bridge 9846 -1-  must be fitted on the gearshift bracket -2-  .
    Fig 1: Identifying Shift And Selector Cable Adjustment Position
    G09992272Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Clip in shift and selector cables -1-  and lock bayonet locks -2-  (-arrows-  ).
    Fig 2: Turning Bayonet Lock For Shift And Selector Cables
    G09992273Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals