Technical Values
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake hose bracket to wheel carrier | M6 screw | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Wheel bearing assembly with housing to wheel carrier (911 GT3) | Cheese head bolt, M12 x 1.25 x 45/always use new bolts when re-tightening | Initial tightening | 80 Nm (59 ftlb.) | ||
| Wheel bearing assembly with housing to wheel carrier (911 GT3) | Cheese head bolt, M12 x 1.25 x 45/always use new bolts when re-tightening | Final tightening | +120° | ||
| Wheel hub to wheel carrier (tension bolt for rear wheel drive) | Lock nut, M22 x 1.5/always use new lock nuts following removal | Tightening torque | 460 Nm (340 ftlb.) |