Installing Lower Trailing Arm
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2019 Porsche 911, 2018 Porsche 911, 2017 Porsche 911, 2016 Porsche 911, and 2015 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Check bushings/boots of trailing arm for cracks and signs of damage.
- Ball joint taper must be free of grease.
- Replace screws with torque angle and lock nuts.
- Use correct tightening torques and torque angle . → 4X00IN TIGHTENING TORQUES FOR FRONT AXLE