LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2014 >> Boxster S, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 199 (92 - Windshield Wiper And Washer System -- CARRERA (997)) >> WM 927219 Removing And Installing Spray Nozzle For Headlight Washer System (All Except 911 Gt3 RS 4.0) >> Removing and installing spray nozzle head >> Removing spray nozzle head

Removing spray nozzle head

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert an angled scriber, for example, into the opening in the nozzle head and pull the spray nozzle up and out.
    Fig 1: Pulling Out Nozzle Head
    G09827581Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Hold the nozzle head at the top and disengage the catch on the spray nozzle with a small screwdriver -A-  . The nozzle head is released from the spray nozzle and the spray nozzle moves back into place.
scientia non olet · About LEMON Manuals